Yamatake SDC15 Series - User Manual

1
Yamatake Corporation
Digital Controller SIO
Driver
1 System Configuration.......................................................................................................3
2 Selection of External Device............................................................................................9
3 Example of Communication Setting...............................................................................10
4 Setup Items....................................................................................................................74
5 Cable Diagram ...............................................................................................................79
6 Supported Devices.......................................................................................................138
7 Device Code and Address Code..................................................................................152
8 Error Messages............................................................................................................156

Yamatake SDC15 Series Specifications

General

Control Method	PID control
Input Type	Thermocouple, RTD, DC voltage, DC current
Alarm Output	Relay contact
Communication	RS-485 (optional)
Mounting	Panel mounting
Humidity	20 to 90% RH (non-condensing)
Output Type	Relay
Power Supply	100 to 240 VAC, 24 VAC/DC
Control Output	Relay contact
Dimensions	48 x 48 mm
Operating Temperature	-10 to 50°C
Storage Temperature	-20 to 60°C
Type	Digital Controller

Summary

System Configuration

Selection of External Device

Communication Setting Examples

GP-Pro EX Communication Setup Example 1

Demonstrates GP-Pro EX communication settings for the first example scenario.

Setup Items

GP-Pro EX Setup Items

Lists and describes communication parameters configurable within GP-Pro EX.

Off-Line Mode Setup

Explains how to configure communication settings when the display is in off-line mode.

Cable Diagrams

Cable Diagram 1: RS-232 C

Illustrates the first cable connection diagram for RS-232C device communication.

Cable Diagram 2: RS-422;485 (4-wire)

Shows cable connection for RS-422/485 (4-wire) communication.

Cable Diagram 3: RS-422;485 (2-wire)

Illustrates cable connections for RS-422/485 (2-wire) communication.

Supported Devices

Device and Address Codes

SDC Series Device Codes and Addresses

Lists device codes and address codes for SDC series devices.

DMC;DCP;CMC Series Device Codes and Addresses

Provides device codes and addresses for DMC, DCP, and CMC series devices.

Error Messages