Yamatake SDC20 Series User Manual

1
Yamatake Corporation
Digital Controller SIO
Driver
1 System Configuration.......................................................................................................3
2 Selection of External Device............................................................................................9
3 Example of Communication Setting...............................................................................10
4 Setup Items....................................................................................................................74
5 Cable Diagram ...............................................................................................................79
6 Supported Devices.......................................................................................................138
7 Device Code and Address Code..................................................................................152
8 Error Messages............................................................................................................156

Yamatake SDC20 Series Specifications

General

Brand	Yamatake
Model	SDC20 Series
Category	Controller
Language	English

Summary

System Configuration

Selection of External Device

Example of Communication Setting

Setting Example 1

Shows communication settings for GP-Pro EX and device configuration for SDC10.

Setting Example 2

Details communication settings for GP-Pro EX and device settings for SDC15.

Setting Example 3

Covers GP-Pro EX communication settings and device settings for SDC20/21.

Setup Items

Setup Items in GP-Pro EX

Details communication settings for GP-Pro EX, including SIO Type, Speed, Data Length, etc.

Settings in Off-Line Mode

Explains communication settings for the Display in off-line mode.

Cable Diagram

Cable Diagram 1

Shows cable connections for GP3000/IPC/PC/AT to COM1.

Cable Diagram 2

Details cable connections for GP3000/IPC/PC/AT using RS-422/485 (4-wire).

Cable Diagram 3

Presents cable diagrams for RS422/485 (2-wire) connections.

Supported Devices

SDC10 Supported Devices

Lists supported device addresses for the SDC10 series.

SDC15/SDC25/SDC26/SDC35/SDC36 Supported Devices

Covers supported addresses for SDC15, SDC25, SDC26, SDC35, SDC36 series.

DMC50 Supported Devices

Details supported device addresses for the DMC50 series.

Device Code and Address Code

SDC10 Device Codes and Addresses

Provides device and address codes for the SDC10 series.

DMC50 Device Codes and Addresses

Lists device and address codes for the DMC50 series.

CMC10B Device Codes and Addresses

Details device and address codes for the CMC10B series.

Error Messages