Yamatake SDC40A Series User Manual

1
Yamatake Corporation
Digital Controller SIO
Driver
1 System Configuration.......................................................................................................3
2 Selection of External Device............................................................................................9
3 Example of Communication Setting...............................................................................10
4 Setup Items....................................................................................................................74
5 Cable Diagram ...............................................................................................................79
6 Supported Devices.......................................................................................................138
7 Device Code and Address Code..................................................................................152
8 Error Messages............................................................................................................156

Yamatake SDC40A Series Specifications

General

Type	Digital Indicating Controller
Control Method	PID control
Input Type	Thermocouple, RTD, DC voltage
Output Type	Relay, voltage pulse, current
Power Supply	100 to 240 VAC, 50/60 Hz or 24 VAC/VDC
Alarm Output	Relay contact
Communication	RS-485 (optional)

Summary

System Configuration

Connection Configuration

1:1 Connection Details

Describes point-to-point connection between Display and External Device.

1:n Connection Details

Describes one-to-many connection configurations.

IPC COM Port Configuration

RS-232C DIP Switch Settings

Specifies DIP switch configurations for RS-232C communication.

RS422/485 (4-wire) DIP Switch Settings

Specifies DIP switch settings for RS422/485 (4-wire) communication.

RS422/485 (2-wire) DIP Switch Settings

Specifies DIP switch settings for RS422/485 (2-wire) communication.

External Device Selection

Communication Setting Examples

SDC10 RS232C Communication Example

Demonstrates GP-Pro EX and device settings for SDC10 via RS232C.

SDC15 RS422/485 (2-wire) Example

Demonstrates settings for SDC15 using RS422/485 (2-wire).

SDC20/21 RS422/485 (4-wire) Example

Shows settings for SDC20/21 with RS422/485 (4-wire).

SDC30/31 RS422/485 (2-wire) Example

Illustrates settings for SDC30/31 with RS422/485 (2-wire).

SDC40A RS232C Communication Example

Details communication settings for SDC40A via RS232C.

DMC50 RS422/485 (2-wire) Example

Provides communication settings for DMC50 using RS422/485 (2-wire).

CMC10B RS422/485 (4-wire) Example

Shows communication settings for CMC10B with RS422/485 (4-wire).

Setup Items Configuration

GP-Pro EX Setup Items Overview

Details parameters like SIO Type, Speed, Data Length, Parity, etc.

GP-Pro EX Device Settings

Covers setting Series, Device Address, and Sub Address.

Off-Line Mode Settings

Explains communication settings configurable in off-line mode.

Cable Diagrams

Cable Diagram 1 (RS-232C)

Shows diagrams for RS-232C connections.

Cable Diagram 2 (RS422/485 4-wire)

Illustrates connections for RS422/485 (4-wire).

Cable Diagram 3 (RS422/485 2-wire)

Details connections for RS422/485 (2-wire).

Cable Diagram 5

Provides diagrams for specific adapter/cable combinations.

Cable Diagram 6

Shows cable diagrams for various GP3000 and IPC models.

Cable Diagram 8

Illustrates cable connections for IPC and GP models.

Supported Devices and Addresses

SDC Series Supported Devices

Details device and address range for SDC series.

DMC Series Supported Devices

Lists supported devices and address ranges for DMC series.

DCP Series Supported Devices

Covers supported devices and address ranges for DCP series.

Device Code and Address Code Reference

SDC Series Device Codes

Lists device codes for SDC series devices.

DMC Series Device Codes

Provides device codes for DMC series devices.

DCP Series Device Codes

Lists device codes for DCP series devices.

Error Message Handling

Error Message Format and Display

Details the structure of error messages on the display.

Device Monitor Usage Notes

Provides guidance on handling inaccessible areas in device monitoring.