Yamatake SDC10 Series - User Manual

1
Yamatake Corporation
Digital Controller SIO
Driver
1 System Configuration.......................................................................................................3
2 Selection of External Device............................................................................................9
3 Example of Communication Setting...............................................................................10
4 Setup Items....................................................................................................................74
5 Cable Diagram ...............................................................................................................79
6 Supported Devices.......................................................................................................138
7 Device Code and Address Code..................................................................................152
8 Error Messages............................................................................................................156

Summary

System Configuration Overview

External Device Selection Guide

Communication Setting Examples

Setting Example 1: SDC10 Configuration

Demonstrates GP-Pro EX and controller settings for SDC10 communication.

Setting Example 10: SDC40 A Configuration

Details GP-Pro EX and controller settings for SDC40A communication.

Setting Example 32: CMC10 B Configuration

Provides GP-Pro EX and controller settings for CMC10B communication.

Setup Item Details for Communication

Supported Device Specifications

SDC10 Supported Devices and Addresses

Lists device, bit, and word addresses for SDC10, including system data area specifications.

SDC40 A Supported Devices and Addresses

DMC50 Supported Devices and Addresses

DCP552 Supported Devices and Addresses

Yamatake SDC10 Series Specifications