This product has been designed, developed and manufactured for general-purpose
application in machinery and equipment.
When using this product in application requiring particular safety, special care should
be taken to implement a fail-safe and/or redundant design concept as well as a
periodic maintenance program.
Do not use this product in applications outlined below requiring particular safety.
• Safety devices for plant worker protection
• Start/stop control devices for transportation and material handling machines
• Aeronautical/aerospace machines
• Control devices for nuclear reactors
Never use this product in applications where human safety may be put at risk.
RESTRICTIONS ON USE
Micro Flow
TM
, µF
TM
, CMQ
TM
are trademarks of Yamatake Corporation.
©2007 Yamatake Corporation ALL RIGHTS RESERVED
If it is necessary to change the parameters of the CMQ-V Series frequently by
communication, write data at addresses of RAM. The guaranteed data write count at
the EEPROM addresses is limited to 100,000 times.
Note that the data in RAM is cleared, and the data in EEPROM is copied on RAM if the
power supply to the CMQ-V Series interrupted.
IMPORTANT
Be sure that the user receives this manual before the product is used.
Copying or duplicating this user’s manual in part or in whole is forbid-
den. The information and specifications in this manual are subject to
change without notice.
Considerable effort has been made to ensure that this manual is free
from inaccuracies and omissions. If you should find an error or omis-
sion, please contact Yamatake Corporation.
In no event is Yamatake Corporation liable to anyone for any indirect,
special or consequential damages as a result of using this product.
NOTICE
To Next Page
Loading...
Need help?
General
