12
3. Names and functions of parts
Explanation of characters
Characters Identifier Name Application
cAL Calibration offset setting
Used for inputting a calibration offset
temperature
See section “Using the calibration
offset function” on page 31.
oH
Setting overheat
protection device
temperature
Used for setting an overheat
protection device temperature.
See section “Settings for overheat
prevention device” on page 16.
Lock Key lock of settings
Key locks settings to prevent their
alteration
See section ”Using the lock function”
on page 32.
* See the section “Operation mode・function setting keys and characters” on page 15 for
characters of operation modes and functions
.
To Next Page
Loading...
