6
2. Before operating the unit
Precautions when installing the unit
Warning
4. Do not alter the product. 5. Install the unit on a level surface
The user shall never attempt to alter the
unit since it may cause a malfunction.
Fla
Install the unit on a level surface.
Installing this unit on a slope might cause
unexpected troubles or malfunctions.
6. Do not overload shelves.
7. Do not place too many samples.
Withstand load of each shelf board is
15kg in uniform loading. Place samples
in a dispersed fashion.
Too many samples may prevent proper
temperature control. Be sure to use
shelf boards and place samples apart
each other so as to make free space of
30% or more to assure proper
temperature accuracy.
Shelfboard
Sample
15 kg
Make at least 30% of space
Alteration
To Next Page
Loading...
