What to do if there is insufficient fuel supply to fuel injection pump in Yanmar Engine?
If there's insufficient fuel supply to the fuel injection pump in your Yanmar Engine, check the fuel tank cock, fuel filter, fuel pipe, and fuel feed pump.
What to do if water enters fuel system in Yanmar Engine?
If water has entered the fuel system in your Yanmar Engine, drain it from the fuel filter.
How to increase lubricating oil level in Yanmar 3TNV88 Engine?
If the lubricating oil level is insufficient in your Yanmar Engine, add the proper lubricating oil.
What to do if lubricating oil filter is clogged in Yanmar 3TNV88 Engine?
If the lubricating oil filter in your Yanmar Engine is clogged, clean or replace it.
What to do if there is leakage from lubricating oil piping system in Yanmar 3TNV88?
If there's leakage from the lubricating oil piping system in your Yanmar Engine, repair it.
How to fix defective pressure regulating valve in Yanmar 3TNV88?
If the pressure regulating valve is defective in your Yanmar Engine, clean, adjust, or replace it.
What to do if fuel pipe is clogged or cracked in Yanmar 3TNV88 Engine?
If the fuel pipe is clogged or cracked in your Yanmar Engine, clean or replace it.
Why is there insufficient cooling effect of radiator in Yanmar 3TNV88 Engine?
If there is insufficient cooling effect of radiator in your Yanmar Engine, it may be due to a defective thermostat (kept opened) or a slipping fan belt.
General| Engine Model | 3TNV88 |
|---|---|
| Engine Type | Vertical, water-cooled, 4-cycle diesel |
| Number of Cylinders | 3 |
| Aspiration | Natural |
| Fuel System | Direct injection |
| Cooling System | Water cooled |
| Fuel | Diesel |
| Displacement | 1.642 L |
| Rated Speed | 3000 rpm |
| Starting System | Electric starter |
| Lubrication System | Forced lubrication |
| Dry Weight | 167 kg |
| Bore x Stroke | 88 x 90 mm (3.46 x 3.54 in) |
Details publication usage restrictions and copyright information.
Covers warranty terms, duration, and owner responsibilities for Yanmar engines.
Details emission control system warranty for USA models, including coverage and rights.
Section to record engine details for service and literature requests.
Explains symbols used to identify specific engine model information.
Highlights key features, benefits, and application areas of Yanmar TNV engines.
Illustrates and identifies major engine components for indirect and direct injection models.
Describes operator console gauges and indicators that display engine status.
Explains the function and operation of key controls like the ignition switch.
Step-by-step guide on how to properly start the Yanmar engine.
Procedures for monitoring engine performance and status while it is running.
Safe steps to follow for properly shutting down the engine to ensure longevity.
Overview of maintenance items and their recommended intervals for engine upkeep.
Detailed steps for performing initial and routine maintenance tasks.
Covers maintenance required at 50, 250, and 500-hour intervals for engine care.
Details maintenance tasks for 1000, 1500, and 2000-hour service intervals.
Guide to diagnosing and resolving common engine problems based on symptoms.
Provides essential information to supply to a dealer for effective troubleshooting.
Instructions for preparing the engine for extended periods of non-use.
Steps for safely bringing a stored engine back into operation.
Explains the general model number description and notation.
Lists detailed technical specifications for various Yanmar TNV engine models.
To Next Page
