Need help?Do you have a question about the Yanmar 4JH-T(B)E and is the answer not in the manual?
General| Engine Model | 4JH-T(B)E |
|---|---|
| Cylinders | 4 |
| Fuel Type | Diesel |
| Combustion System | Direct Injection |
| Starting System | Electric starter |
| Power Output | 55 kW (75 hp) @ 3300 rpm |
| Cooling System | Water-cooled |
| Lubrication System | Forced Lubrication |
| Rotation | Counterclockwise, viewed from flywheel side |
| Engine Type | 4-stroke, water-cooled, turbocharged/intercooled diesel |
Provides detailed technical specifications for various 4JH engine models.
Details inspection and servicing procedures for the engine's cylinder block.
Explains inspection, measurement, and replacement of pistons and pins.
Describes the function and components of the engine's fuel supply system.
Provides step-by-step procedures for governor disassembly, reassembly, and inspection.
Details the process for disassembling, reassembling, and inspecting the fuel injection pump.
Covers the procedures for adjusting the fuel injection pump and governor settings.
Covers specifications, disassembly, inspection, and adjustment of fuel injection nozzles.
Lists common faults, causes, and remedies for the fuel injection system.
Explains turbocharger specifications, construction, function, and maintenance.
Covers the construction, specifications, disassembly, and inspection of the lube oil pump.
Covers construction, specifications, disassembly, and inspection of the sea water pump.
Details construction, specifications, and inspection of the fresh water pump.
Provides detailed inspection and servicing procedures for gear components.
Guides through the reassembly process of the reduction and reversing gear.
Explains the construction and operation of the KM4A shifting mechanism.
Covers inspection and servicing procedures for KM4A gear components.
Provides step-by-step instructions for disassembling the KM4A marine gear.
Guides through the reassembly process of the KM4A marine gear.
Details starter motor specifications, construction, operation, and troubleshooting.
Outlines alternator specifications, construction, function, and troubleshooting.
Provides essential precautions for engine disassembly and reassembly.
Detailed procedures for disassembling and reassembling engine components.
Outlines pre-run checks, procedures, and precautions for testing the engine after assembly.
To Next Page
