n
2-18
Differential Device
/77,
(13)
Spiral ring
gear
38
(1)
Fit the following into the (1) differential
the
(11) differential side gear 14 (2 pcs) at the
housing, the
(6)
differential pinion liners (2 pcs),
same time.
(8) differential pinion 10,
(12) liner 22.5
x
30
x
1,
the
(5)
differential side gear spacers (2 pcs),
(2)
Fit the
(7)
differential pinion shaft into
-
(11) the differential side gear 14 (2 pcs), and the
place after passing
it
through the (1) differential
(3)
differential thrust collar. Be sure to put in the
housing,
(6)
differential pinion liners (2 pcs) the
right and left
(12) liners 22.5
x
30
x
1
(2 pcs),
(8) differential pinion 10 (2 pcs), and the (3)
the
(5)
differential side gear spacers (2 pcs), and differential thrust collar.
To Next Page
Loading...
