Yara N-Sensor User Manual

Yara N-Sensor V3.10 Operation Manual
Biomass cutoff: (N-application only) The
average sensor value on the reference
area is close to or lower than the Biomass
cutoff entered in the Agronomic calibration
menu.
The cutoff value should be reduced or an-
other, more representative reference area
should be chosen.
Wrong field: The current position of the
vehicle is more than 2 km away from the
last position recorded in the selected task.
It is not allowed to store data from distant
fields into a single task.
Select a new task in order to start a new
field.
Wrong operation mode: The selected
task already contains data which has been
acquired using a different operation mode
(see section
5). It is not possible to store
data from different operation modes into a
single task.
Select a new task or select a task that was
started with the same operation mode.
Last revised: 28.01.2009 14:39 Page 14 of 64

Yara N-Sensor Specifications

General

Brand	Yara
Model	N-Sensor
Category	Measuring Instruments
Language	English