Need help?Do you have a question about the Yara N-Sensor and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| IP Rating | IP65 |
| Manufacturer | Yara |
| Type | N-Sensor |
| Measurement | Nitrogen uptake, biomass |
| Technology | Optical sensors |
| Measured Parameters | Biomass |
| Application | Precision agriculture |
| Measurement Principle | Reflectance spectroscopy |
Proper utilization requires competent installation; modifications or unauthorized parts can cause damage.
Describes various status icons on the work screen indicating system status like GPS or N-Sensor connection.
Describes the main button for starting and stopping N-Sensor operations.
Warning for low irradiance, system switches to uniform application rate.
Alarm for lost N-Sensor connection, system switches to uniform rate.
Warning for lost connection to the controller; system deactivates and stops logging.
Settings related to the spreader or sprayer, like zero rate and signal delay.
Displays current N-Sensor raw data, status, and internal calibration options.
Settings and status information for the GPS receiver connection.
Configuration options for the variable-rate controller, including type, limits, and rate display.
Applies agents from a prescription map, rate based solely on the map.
Default mode for site-specific nitrogen application using relative calibration.
Applies a predefined target rate, with automatic in-field calibration.
Uses algorithms for site-specific dosing of potato haulm killing herbicides.
Sets crop, growth stage, N content, min/max/uniform rates, and reference calibration.
To Next Page
