- 17 -
Improper maintenance and storage of the push spreader may void your warranty.
MAINTENANCE
• After each use clean material out of hopper.
• Rinse/dry inside and outside of the spreader after each use.
• Before operating make sure the tires have the RECOMMENDED TIRE PRESSURE.
• Periodically check all fasteners for tightness.
• Annually clean and lightly lubricate parts.
• Use a glossy enamel spray paint to touch up scratched or worn painted metal surfaces.
• Never exceed load capacity rating of 125lbs it will damage the spreader.
IMPORTANT:
If a part needs replacement, only use parts that meet the manufacturer’s specifications. Replacement
parts that do not meet specifications may result in a safety hazard or poor operations.
STORAGE
• Never allow material to remain in the hopper for extended periods of time.
• Before storing make sure the spreader is clean and dry for years of trouble-free service.
• Store indoors or protected area during severe weather and winter months.
Load Capacity ................................................................................................ 125lb
Spreader Type ......................................................................................... Broadcast
Hopper Material ................................................................................ Polypropylene
Hopper Dimensions ................................................................... 29.5” x 16.5”x13.4”
Overall Dimensions ..................................................................... 43.3”x31.5”x33.5”
Wheel size .......................................................................................................... 14”
The manufacturer reserves the right to make improvements in design and/or changes in
specifications at any time without incurring any obligation to install them on units previously
sold.
To Next Page
Loading...
