Failure to follow these instructions may result in property damage or injury to the operator or
bystanders.
ATTACH SWEEPER TO TOW VEHICLE
1. Make sure the tow vehicle and sweeper are on a level surface.
2. Set the sweeper height adjustment handle to the middle position.
3. Attach the sweeper to the vehicle hitch using the spacers to make the bottom of the
sweeper bag level as possible with ground.
NOTE: For the best performance the bottom of the sweeper bag needs to be level with the
ground with at least a 5” clearance.
USING YOUR SWEEPER
1. Adjust the brush height of the sweeper. The best brush setting is ½” down in the grass.
Always mow the grass to and even height before sweeping.
2. For best results when sweeping do not exceed 5mph. In some cases it may be better to
operate and less than 5mph.
3. Always secure and lock the sweeper to the vehicle hitch before operating.
4. When dumping the sweeper pull the rope forward to dump the hopper. Always empty the
hopper after each use.
Never attach the hopper rope to any part of your body or clothing.
Never hold onto the rope while towing the sweeper.
Only attach the rope to the tow vehicle to keep it away from the wheels and rotating parts.
Keep sweeper away from fire or excessive heat will cause damage to the brushes and bag.
To Next Page
Loading...