Need help?Do you have a question about the YARD Commander SP31128 and is the answer not in the manual?
General| Brand | YARD Commander |
|---|---|
| Model | SP31128 |
| Category | Lawn Sweeper |
| Language | English |
Attaches the angle bracket to the sweeper housing using M8x16 hex bolt and M8 hex lock nut.
Attaches the RH and LH hitch tubes to the sweeper housing using M6x45 hex bolt and M6 lock nut.
Fastens both hitch tubes together using M8x75 hex bolts and M8 lock nuts.
Attaches the hitch bracket to the hitch tubes using M8x55 hex bolts and M8 lock nuts.
Attaches the height adjustment handle to the height adjustment tube using M8x40 hex bolts.
Inserts M8x20 hex bolt through angle bracket, then spacer, strap, washer, and lock nut.
Attaches the adjustment handle with washers and plastic knob using an M8x30 carriage bolt.
Attaches the connecting rod to the sweeper housing using M6x12 hex bolts and M6 lock nuts.
Guides through assembling the hopper bag frame using various tubes and fasteners.
Secures the bag arm tubes to the sweeper's hitch tubes using clevis pins and R pins.
Instructions for connecting the sweeper to the tow vehicle, ensuring proper ground clearance.
Guidance on adjusting brush height, operating speed, and dumping the hopper.
Details routine maintenance tasks like cleaning, checking fasteners, and lubricating parts.
Provides recommendations for lubricating bearings and gears.
Instructions for servicing wheel gears, emphasizing one-wheel removal at a time.
Step-by-step guide for replacing sweeper brushes, noting retainer bolt removal.
Advice on preparing the sweeper for storage, including cleaning, lubrication, and protection.
To Next Page
