Yard force LS G30A User Manual

18
Assembling the Bar and chain blade
WARNING : Before assembling the chain saw Following items should be considered.
- Before assembling this product .ensure the battery pack has been removed.
- Ensure the hand guard in position “brake off”
As shown in Fig 6
• Because the teeth of the chain saw blade are very sharp. Protective gloves must be worn
for all work on the chain.
• When assembling the chain. Please observe the correct running direction of the saw
blade.
1. Remove the clutch cover and the clamp knob.
2. Lay the chain saw blade on the saw bar , beginning from the top.
As shown in Fig 7
Fig 6
“Brake on”
“Brake off”
Fig 7
Saw blade
Saw bar
ASSEMBLY

Yard force LS G30A Specifications

General

Brand	Yard force
Model	LS G30A
Category	Chainsaw
Language	English