3
Model
LS G30A&LS G30W
Nominal voltage of product with battery 40 V d.c.
No load chain speed 11.3 m/s
Bar Length 300mm (12”) Oregen 124MLEA041
Chain Oregen 90PX045X (chain pitch 0.375”)
Guaranteed sound power level 98 dB(A)
Net weight 5.5 kg
Vibrations a
h
: 3.5 m/s² K=1.5 m/s²
Battery pack Model AL G40A
Battery capacity 4.0Ah
Battery charging time Max. 2.0hr
Battery charger Model AL GC2A
Input
220-240V AC,
50/60Hz 100W
Output 40V d.c. 2A
Protection class II
* The following information :
-That declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another.
-That declared vibration total value may also be used in a preliminary assessment of expo-
sure.
WARNING :
Depending on the actual use of the product the vibration values can differ from the declared
total!
Adopt proper measures to protect yourself against vibration exposure! Take the whole work
process including times the product is running under no load or switched off into consideration!
This Chain saw has been designed for cutting Tree or Log.
The machine is to be used only for its prescribed purpose . any other use is deemed to be a
case of misuse. The user/operator and not the manuafacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial , trade or indus-
trial applications . our warranty will be voided if the machine is used in commercial , trade or
industrial businesses or for equivalent purposes.
TECHNICAL SPECIFICATIONS
INTENDED USE
To Next Page
Loading...
Need help?
General
