20
similar items can short battery packs and cause a re or explosion
Always unplug the charger when not in use and store in a dry secure place.
Avoid charging or storing your battery in temperatures below 0°C and above 45°C .
Cool down hot battery pack from a just-operated tool for approximately 30 minutes before at-
tempting to recharge.
Removing and inserting the battery pack
As shown in Fig 11
To remove the battery pack from the tool
Press the battery pack release button ,the battery pack will come out automatically, then re-
move it .
To insert the battery pack.
Align the ribs of battery pack with its corresponding hole of the tool.
Push the battery pack into the hole until hear click sound.
Fig 11
Press
It means the battery pack has been locked in position.
WARNING! Make sure that the tool is “OFF”
Wall-mount holes
As shown in Fig12
Fig 12
9.5CM
OPERATION
To Next Page
Loading...
