Yard force LT G33A - Troubleshooting

26
Troubleshooting
WARNING!
Before performing any repair work, always remove the battery pack and wait until the
cutting line has come to a standstill.
CAUTION!
Improper repairs can result in the product functioning unsafely. This endangers your-
self and your environment.
Faults which cannot be rectied with the aid of following table may be rectied by a specialist
company only (customer service center).
Please be aware that any improper repairs will also invalidate the warranty and additional
costs may be incurred.
Use only genuine spare parts. Only these spare parts are designed and suitable for the prod-
uct. The use of other spare parts not only voids the warranty, you can also endanger yourself
and your environment.
Fault/malfunction Cause Remedy
Product not running. 1. Battery discharged?
2. Battery pack does not sit its
place correctly
3. Device defective?
1. Charge rechargeable battery.
2. Install the battery pack once
again.
3. Contact service partner.
The tool is vibrating 1.The tool is clean? There is
more grasses accumulated
in the line spool and safety
guard?
2.Does the Line spool has been
installed correctly?
1.Clean the tool, remove grass
in between the Line Spool and
the safety Guard.
2.Insert the Line Spool
correctly.
TROUBLESHOOTING