To Next PageTo Next PageWhat to do if my Yard force LT G33A is not running?
If your Yard force Trimmer isn't running, there are a few potential causes: 1. The battery may be discharged. If so, charge the rechargeable battery. 2. The battery pack might not be correctly installed. Try reinstalling the battery pack. 3. If neither of these solutions works, the device may be defective, and it is recommended to contact a service partner.
Why is my Yard force LT G33A vibrating?
If your Yard force Trimmer is vibrating, consider the following: * Check if the tool is clean. Grass accumulation between the line spool and safety guard can cause vibration. Clean the tool and remove any grass. * Ensure the line spool is correctly installed. Incorrect installation can also lead to vibration. Insert the line spool correctly.
General| Power Type | Electric |
|---|---|
| Cutting Width | 30 cm |
| Line Diameter | 1.6 mm |
| Telescopic Shaft | Yes |
| Adjustable Handle | Yes |
| Power Source | Battery |
Verify all delivered parts are present and undamaged after unpacking the product.
Identifies and explains hazard symbols found on the power tool itself.
General safety instructions applicable to all power tools.
Essential advice for the operator's personal safety and well-being.
Comprehensive safety instructions specifically for the cordless grass trimmer operation.
Instructions for attaching the flower protection to the motor housing for protection.
Steps for correctly installing the safety guard onto the motor housing for operator protection.
Guidance on positioning and securing the auxiliary handle for comfortable use.
How to select the desired cutting diameter from the available options.
Procedure for checking and adjusting the nylon cutting line length.
Detailed steps for connecting and charging the battery pack using the provided charger.
Procedure for safely turning the trimmer on and off using the controls.
Techniques and advice for efficiently cutting grass with the trimmer.
Step-by-step instructions for replacing the nylon line spool.
Procedures for maintaining the battery pack for optimal performance and longevity.
Guidelines for properly cleaning and storing the machine after use.
