EasyManua.ls Logo

Yard force LT G33A - Technical Specifications; Intended Use

Yard force LT G33A
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Model LT G33A & LT G33W
Nominal voltage of machine/battery 40V
No load speed 8000-12000min
-1
Cutting width 300/330 mm
Cutting line dia. Ø1.6mm
Net weight 5.7kg
Guaranteed sound power level 96 dB(A)
Battery pack Model AL G40A
Battery capacity 4.0Ah
Battery charging time Max. 2.0hr
Battery charger Model AL GC2A
Input
220-240V AC,
50/60Hz 100W
Output 40V d.c. 2A
Protection class II
The sound values have been determined according to noise test code given in EN 786, using
the basic standards EN ISO 11201 and EN ISO 3744.
The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures
are necessary.
The product is intended for cutting weed, grass or similar soft vegetation in areas that are hard
to reach, e.g. under bushes, on slopes and edges. It may not be used to work on unusual
thick, dry or wet grass, e.g. pasture grass, or to shred leaves.
For safety reasons it is essential to read the entire instruction manual before rst operation
and to observe all the instructions therein.
This product is intended for private domestic use only, not for any commercial trade use. It
must not be used for any purposes other than those described.
TECHNICAL SPECIFICATIONS
INTENDED USE

Related product manuals