12
Hotline: 1-866-902-9690
ASSEMBLY
1. Clean the area around the gas filler cap before removing the cap. Remove the warning tag, and check
the fuel level (see Fig. 8).
2. Refill the tank if the fuel level is low.
3. Refuel carefully to avoid overfilling or spilling fuel. To allow expansion of the fuel, don't fill above the
bottom of the filler neck (see Fig.9). There should be no fuel in the filler neck.
4. Clean up any overflow or splashes of gas before starting the engine.
5. Tighten the filler cap after filling: finger tight only.
Fig.8
Fig.9
gas ller cap
2”
To Next Page
Loading...
