EasyManuals Logo

Yard force YF60VRX21-SP User Manual

Yard force YF60VRX21-SP
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16
and cause a re or explosion.
4. Always unplug the charger when not in use
and store in a dry and secure place.
5. Avoid charging or storing your battery in
temperatures below 41°F(5°C) and above
113°F(45°C).
6. After use, allow the battery to pack to cool
down for approximately 30 minutes before
attempting to recharge.
MAINTENANCE AND STORAGE
WARNING
Before performing any maintenance or cleaning
work, always ensure that the battery pack/safety
key has been removed and wait until the blade
has stopped completely and the tool has cooled
down.
Cleaning
Cleaning the product
Use a soft brush to remove any accumulated
dust and debris. Wear safety glasses to
protect your eyes whilst cleaning.
Wipe down the product enclosure with a
slightly damp cloth. Do not spray the unit
with water. Ingress of water may destroy the
switch unit and the electric motor.
Maintenance
NOTE:
Always wear gardening gloves when
handling or working near the sharp blades.
1) Keep all nuts, bolts and screws tight to be
sure that the machine is in safe working
condition.
2) Check the grass bag frequently for wear or
deterioration.
3) Examine the machine and replace worn or
damaged parts for safety.
Removing/Installing the blade (See Fig. 22 &
Fig. 23)
1. Using a wrench of correct size locate on the
blade bolt nut.
2. Wearing heavy gloves hold the blade xed
and turn the wrench anti-clockwise and
remove the bolt.
3. Fitting the replacement blade correctly with
marking facing up and align pegs correctly
then t the bolt and retighten the bolt securely
to torque 15- 23 ft. lb.
WARNING
Replace or re-sharpen the mowing blade at
the end of the mowing season. Always have
the mowing blade re-sharpened or replaced
by a customer service center (measurement
of imbalance).
Unbalanced blades will cause the lawn
mower to vibrate violently-risk of accident!
Battery Maintenance:
Use the following procedures to enable optimum
usage of the battery:
1. Protect the battery against moisture and
water.
2. Store the battery only with in a temperature
range from 31
˚
F to 113
˚
F. As an example,
do not leave the battery in the lawn mower in
direct sunlight.
3. Clean the battery occasionally with a soft,
clean and dry brush.
4. If you do not use the product for a long time,
please charge and discharge the battery pack
once every 6 months.
Storage and transport
After cleaning the unit thoroughly, store it in a dry
room and allow the motor to cool down.
1. Release the Handle Quick release levers,
and fold the handles down.
2. Position the lower handle lock pin into the
mower bracket. Lock the handles in place by
closing the quick release handle.
3. The machine only can be stored at.
NOTE:
Remove the safety key and battery packs. Ensure
cables are not trapped when folding/unfolding the
handle.
Transport
Use the original packaging to ship whenever
possible.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yard force YF60VRX21-SP and is the answer not in the manual?

Yard force YF60VRX21-SP Specifications

General IconGeneral
BrandYard force
ModelYF60VRX21-SP
CategoryLawn Mower
LanguageEnglish

Related product manuals