Do you have a question about the Yard Machines Y2900EC and is the answer not in the manual?
Type | Gas Trimmer |
---|---|
Power Source | Gasoline |
Engine Type | 2-cycle |
Engine Displacement | 29cc |
Cutting Width | 17 inches |
Shaft Type | Straight |
Cutting System | Dual Line |
Read all instructions carefully and be familiar with controls and proper use.
Specific warnings for safe handling and fueling of gasoline units.
Guidelines for safe use, including handling, balance, and avoiding hazards.
Safety measures when using the cutting blade, including blade thrust and kickback.
Procedures for cleaning and storing the unit after use.
Explanation of symbols and pictographs used in the manual for safety.
Instructions on proper mixing ratios and use of fuel and oil for the engine.
Precautions and recommendations for using blended fuels.
Step-by-step guide on how to safely refuel the unit.
Identifies key components and parts of the trimmer/brushcutter.
Steps to assemble and adjust the handlebar for proper grip and control.
How to use the EZ-Link™ system for attaching optional accessories.
Instructions for installing the cutting attachment shield for safety.
Detailed steps for removing the cutting attachment and installing the cutting blade.
Step-by-step guide to start the engine using the manual pull cord.
Instructions for starting the unit with an optional electric starter.
How to properly shut down and stop the engine.
Proper stance and grip for operating the trimmer safely and effectively.
Method for releasing more trimming line while operating.
Tips for achieving the best trimming results and efficient cutting.
Technique for performing decorative trimming around objects.
Guidelines for safe and effective operation when using the cutting blade.
Recommended maintenance tasks and their frequencies.
Procedures for winding or installing new trimming line.
How to clean and maintain the air filter for optimal engine performance.
Steps to adjust the idle speed screw for smooth engine idling.
Guide on how to replace the spark plug and check the gap.
Instructions for cleaning the unit and proper storage procedures.
Common causes and actions for engine starting problems.
Troubleshooting for engine idling, acceleration, and power loss.
Solutions for problems with line advancement and control.
Technical details and measurements of the trimmer/brushcutter.
Features related to the optional electric starter accessory.
Details on what the limited warranty covers and for how long.
Procedures for getting service under the warranty.
Items and conditions not covered by the warranty.