To Next PageTo Next Page
Need help?Do you have a question about the Yard-Man 11B-106C401 and is the answer not in the manual?
Locate model plate on equipment before assembly for support help.
Call for assistance with assembly, controls, operation, or maintenance.
Follow all instructions, use caution, keep area clear, wear safety glasses.
Use caution on slopes, maintain footing, avoid wet grass, stop blade on gravel.
Mow across slopes, watch for obstacles, ensure footing, avoid drop-offs.
Keep children away from mowing area; never allow children under 14 to operate.
Handle fuel with care, extinguish ignition sources, disconnect spark plug before maintenance.
Use this page as a guide to identify slopes where operation is unsafe.
Steps to open carton, remove packing material, and extract unit.
Instructions for attaching handles, connecting cables, and securing parts.
Safety device description; must be depressed to operate; stops engine/blade when released.
Engine has constant speed throttle set at full for best performance.
Handle attached to mower; stand behind unit in operating position to start.
Service engine with fuel and oil per manual; never fill indoors or with running engine.
Attach spark plug wire, prime engine, pull starter rope; release blade control to stop.
Clear area, avoid wet grass, adjust speed, use side-discharge pattern for clippings.
Adjusting plate and lever at each wheel sets cutting height; nine positions available.
Instructions to lower handle height by repositioning handle brackets.
Lubricate blade control, wheels, and engine components as per manual.
Remove, sharpen, balance, and inspect the cutting blade and adapter for damage.
Reinstall blade correctly and clean mower deck after each use.
Prepare mower for storage by cleaning, lubricating, and coating parts.
Refer to engine manual for storage instructions, oil, air cleaner, and spark plug.
List of parts for the control handle and related components.
Parts list for upper and lower handles, grips, and knobs.
List of parts for the main chassis, engine, and connections.
Parts list for wheels, deck assembly, blade adapter, and associated hardware.
List of parts for height adjustment, pivot bars, guards, and covers.
Details warranty period, exclusions, and conditions for new merchandise.
Procedure to get warranty service, including contact information and proof of purchase.
Lists cases not covered by warranty, like engine parts or routine maintenance.
Explains how state law affects specific legal rights and warranty provisions.
General| Engine Brand | Briggs & Stratton |
|---|---|
| Cutting Width | 21 inches |
| Drive Type | Push |
| Engine Type | 4-cycle |
| Cutting Height Positions | 6 |
| Deck Material | Steel |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Starter Type | Recoil |
| Cutting Height | 1.25 - 3.75 inch |
| Wheel Size | 7 inches front, 8 inches rear |
