Yard-Man 203 - User Manual

Operator's Manual
Chipper Shredder
Vacuum
Model Number
2O3
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.
MTD LLC P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
PRINTED IN U.S.A. FORM NO. 770-10023F
(4/04)

Summary

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

TRAINING

Instructions for safe operation and training for users.

PREPARATION

Steps to take before operating the machine.

SECTION 2: ASSEMBLING YOUR CHIPPER SHREDDER VACUUM

SECTION 4: OPERATING YOUR CHIPPER SHREDDER VACUUM

Gas And Oil Fill-Up

Instructions for filling the engine with gasoline and oil.

Starting Engine

Step-by-step guide for starting the engine.

SECTION 6: MAINTAINING YOUR CHIPPER SHREDDER VACUUM

Lubrication (Refer to Figure 5)

Details lubrication points and schedule for various components.

Removing The Flail Screen

Step-by-step guide to remove and clean the flail screen.

Sharpening Or Replacing Chipper Blades

Belt Removal And Replacement

Procedures for removing and replacing the drive belt.

SECTION 7: TROUBLESHOOTING

Engine fails to start

Common causes and remedies for engine starting issues.

Engine runs erratic

Yard-Man 203 Specifications