Yard-Man 247.27432 User Manual

OPERATOR’S MANUAL
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722
PRINTED IN U.S.A. FORM NO. 770-10236
Warning:
This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 368022 Cleveland, Ohio 44136-9722.
(1/99)
AutoDrive
™
Lawn Tractor
Models 247.274020
(13AX604G402)
247.274320
(13AU604H402)

Yard-Man 247.27432 Specifications

General

Brand	Yard-Man
Model	247.27432
Category	Lawn Mower
Language	English

Summary

Finding Your Model Number

Calling Customer Support

Important Safe Operation Practices

Slope Operation

Guidance for operating the tractor safely on slopes to prevent tip-overs and loss of control.

Children

Safety precautions to prevent accidents involving children near the operating tractor.

Service

Guidelines for safe handling of fuel, fluids, and proper disposal of waste materials.

Attachments & Accessories

Tractor Set-Up

Attaching the Battery Cables

Connect positive and negative battery terminals correctly to ensure proper function.

Gas and Oil Fill-Up

Service the engine with gasoline and oil as instructed. Check oil level before operating.

Installing the Mulch Kit

Instructions for installing the mulch kit on 42-inch and 46-inch decks.

Controls

Ignition Switch

Controls for starting the engine and operating headlights.

Throttle Control Lever

Lever to control engine speed and potentially choke function.

Choke Control

Activates choke plate for easier engine starting.

Indicator Monitor / Hour Meter

Displays battery, oil lights, and tracks tractor operating hours.

Key Controls

Key Controls

Covers Lift Lever, Electric PTO, AutoDrive Pedal, Brake Pedal, Parking Brake Button, and Shift Lever functions.

Operation

Cruise Control Button

Engages cruise control for maintaining a set forward speed.

Seat Adjustment Lever

Allows forward or backward adjustment of the operator's seat.

Cup Holder

Convenient location for drinks.

Safety Interlock Switches

System to protect the operator by preventing starting or operation under unsafe conditions.

Engine Operations

Engine Operations

Covers setting cutting height, starting, stopping the engine, and driving the tractor.

Cruise Control Operation

How to engage and disengage the cruise control feature.

Driving on Slopes

Driving on Slopes

Safety guidelines and techniques for operating on inclines.

Operating the Headlights

Instructions for turning the tractor's headlights on and off.

Using the Lift Lever

How to raise or lower the cutting deck.

Engaging the Electric PTO (Power Take-Off) Knob

Procedure for engaging power to attachments like the cutting deck.

Adjustments

Leveling the Deck

Adjusting the cutting deck for proper front-to-rear and side-to-side balance for an even cut.

Seat Adjustment

Adjusting the seat position forward or backward for operator comfort.

Steering Adjustment

Adjusting drag links for proper steering alignment and toe-in.

Carburetor Adjustment

Guidelines for adjusting the engine's carburetor.

Brake Adjustment

Procedure for adjusting the tractor's brake system for proper stopping.

Maintenance

Engine Maintenance

Instructions for checking oil levels and changing engine oil.

Cleaning the Engine and Deck

Procedures for cleaning the tractor's engine and cutting deck.

Cutting Deck Removal

Steps to safely remove the cutting deck from the tractor.

Changing the Deck Belt(s)

Instructions for replacing the drive belts on the cutting deck.

Changing the Transmission Drive Belt(s)

Procedure for replacing the transmission drive belts.

Drive Belts

Instructions for replacing upper and lower drive belts on the tractor.

AutoDrive™ Pedal Adjustment

Adjusting the AutoDrive™ pedal for proper travel and function.

Cutting Blades & Battery

Instructions for sharpening/replacing blades and battery maintenance.

Lubrication

Engine Lubrication

Lubricating the engine with motor oil as per the engine manual.

Pivot Points & Linkage

Lubricating pivot points and linkage with oil or grease.

Steering Gear & Wheels

Lubricating steering gear and wheel axles for smooth operation.

Front Axles

Lubricating front axles with a grease gun, often via zerk fittings.

Troubleshooting Guide

Engine Starting Issues

Diagnosing and correcting problems when the engine won't crank or start.

Engine Performance Issues

Troubleshooting smoking, vibration, and poor discharge.

Electrical System / Tractor Body

Tractor Body Parts Diagram

Exploded view of tractor body components and electrical system parts.

Lift Assembly

Lift Components

Details on lift shaft, lever, and seat adjustment components.

Steering Assembly

Frame and Steering Components

Parts related to the lower frame, steering gear, and steering mechanism.

Wheel Assemblies

Details on the tractor's wheel assemblies and related parts.

Drive System

Drive System Components

Details on pulleys, belts, brake control, and AutoDrive pedal assemblies.

Power Take-off System

PTO System Components

Details on electric PTO clutch, idler brackets, and battery tray.

Cutting Decks

Deck Components

Details on spindle assembly, chute, deck wheels, and blades.

Engine Accessories

Engine Exhaust and Control Components

Details on muffler deflector, exhaust pipes, and throttle cables.

Manufacturer's Limited Warranty

Warranty Service and Other Warranties

Procedures for obtaining service and details on other product warranties.