71 support@yardistrystructures.com
Use caulking
to seal the PLYCARB panels
NOTE; Use caulking for the
inner roof POLYCARB PANELS
as well..
Components
See page 6 for Warning and
First Aid Information.
B: From outside the assembly, on Front Wall, Back Wall and both Side Walls apply silicone sealant on sides
and bottom of Left and Right FB Side Panels, Back Center panel and Side Panels. Sealant should be applied in
small beads and smoothed out. (F18.4 and F18.5)
C: From outside the assembly, on Front and Back Walls apply silicone sealant on bottom of Gable Panels.
Sealant should be applied in small beads and smoothed out. (F18.4 and F18.6)
Sealant
Use caulking
to seal the PLYCARB panels
NOTE; Use caulking for the
inner roof POLYCARB PANELS
as well..
F18.5
F18.4
Side
Panel
Side
Panel
Left FB
Side Panel
Right FB
Side Panel
Back
Center
Panel
Gable Panel
Side Wall
Side Wall
Front Wall
Back Wall
Sealant
Note: All surfaces to be clean, dry, dust
and grease free before application with
temperatures above 5
°
C (41
°
F), no warmer
than 35
°
C (95
°
F).
•
then put in caulking gun. See page 6.
• Apply sealant in small beads and smooth
as required.
• Clean excess with a cloth or paper towel
before it skins over.
• Always wear safety glasses and rubber
gloves when using product.
Step 18: Apply Sealant
Part 2
F18.6
Sealant
Gable Panel
Gable
Panel
To Next Page
Loading...