34
PARTS REQUIRED:
3" (7,6 cm)
FRONT WALL FRAME (Door Header)
7/16" x 3" x 96" (1,1 x 7,6 x 243,9 cm) OSB
2 x 4 x 16-1/8 (5,1 x 10,2 x 41 cm)
CHC
2 x 4 x 84" (5,1 x 10,2 x 213,4 cm)
TO
Place (1) TO and (1) CHC end-to-end.
Center OSB on top of TO and CHC.
Nail using 3" nails in the pattern shown.
Place another TO and CHC on top of OSB, staggering the seams from the rst TO and CHC.
3
1
You have assembled your door header.
FINISH
1
OSB
ASSEMBLED
END VIEW
DOOR
CHC
CHC
TO
TO
Flip header assembly over and nail as shown on the other side.
Flush
Flush
Flush
To Next Page
Loading...
Need help?
General
