58
PARTS REQUIRED:
EAVE SOFFITS
Install 1st ROS under roof panel, tight against wall panels and ush to back edge of
gable overhang using 1" screws .
Install ROS same as rst ROS; with ends ush to the installed soft boards.
FINISH
You have nished installing your softs.
Repeat STEPS 1 - 2 on opposite side.
1
ROS
3
Space
screws
evenly
ROS
Flush
4/4 x 5-1/2" x 57-15/16" (2,5 x 14,0 x 147,2 cm)
ROS
1" (2,5 cm)
BEGIN HERE -
ROS with
To Next Page
Loading...
Need help?
General
