YARDMAX YM0146 - Operation Guide; Loading and Mixing Procedure; Emptying the Mixer Drum

OPERATION
Figure 4
LOADING
EMPTYING
For best results, always load the mixer in the following order:
1. Add the required amount of gravel into the drum.
2. Add the required amount of cement into the drum.
3. Add the required amount of sand into the drum.
4. Pour the required amount of water into the drum.
Completely unwind the extension cord. Connect it
to the concrete mixer first before plugging in power
supply.
To avoid concrete or mortar sticking to the insides of
the mixer drum, slowly pour material into the mixer
steadily over the rim.
Always start the motor before you start loading the
drum. The mixer blades should be turning before you
start adding the contents.
Do not turn the mixer off (stop rotating arms) if you
have content inside the bin. Always empty the drum
completely with the mixer arms rotating.
A built-in thermal protector is installed in the motor to
prevent overheating, and will cool automatically as the
motor cools.
Loading / Mixing Position
Emptying Position
10
Electric Concrete Mixer
»
Operator’s Manual
Operation
|
74109US25M101.indd 10 2017/7/4 17:22:37