ELECTRICAL
1) 2-pronged plug
2) Properly grounded extension cord
WARNING:
DOUBLE INSULATED (See Figure 4.)
GROUNDING INSTRUCTIONS
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least
resistance for electric current, and reduces the risk of electric shock. This tool is equipped with
a power cord that has a POLARIZED plug.The power cord MUST be plugged into a
matching outlet that is properly installed and grounded in accordance with ALL local codes and
ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper outlet
installed by a qualified electrician.
CAUTION:
IN ALL CASES, MAKE CERTAIN THE RECEPTACLE IN QUESTION IS
PROPERLY GROUNDED. IF YOU ARE NOT SURE, HAVE A CERTIFIED ELECTRICIAN
CHECK THE RECEPTACLE.
WARNING:
TO AVOID INJURY, USE ONLY IDENTICAL REPLACEMENT PARTS
CHAINSAW.
WARNING:
DOUBLE INSULATION DOES NOT TAKE THE PLACE OF NORMAL
SAFETY PRECAUTIONS WHEN OPERATING THIS TOOL.
WARNING:
TO AVOID ELECTRIC SHOCK:
1. Use only identical replacement parts when servicing a tool with double insulation.
Servicing should be performed by a qualified technician.
2. Do not use in wet or damp areas or expose to rain.
Fig. 4
10
TO AVOID ELECTRICAL HAZARDS, FIRE HAZARDS, OR DAMAGE TO
THE TOOL, USE PROPER CIRCUIT PROTECTION. THIS CHAINSAW IS WIRED AT THE
FACTORYFOR 120 V OPERATION. CONNECT TO A 120 V, 15 A CIRCUIT, AND USE A
15 A TIME-DELAYED FUSE OR CIRCUIT BREAKER. TO AVOID SHOCK OR FIRE
WHEN THE POWER CORD IS WORN, CUT, OR DAMAGED IN ANY WAY, REPLACE IT
IMMEDIATELY.
This chainsaw has a plug that looks like the one shown in Fig. 4.
The chainsaw is double insulated to provide a double thickness of insulation between you
and the tool’s electrical system. All exposed metal parts are isolated from the internal metal
motor components with protective insulation.
To Next Page
Loading...
Need help?
General
