OPERATION
20
WORK AREA PRECAUTIONS (See Figure 11)
• Cut only wood or materials made from wood; no sheet metal, no plastics, no masonry, no
non-wooden building materials.
• Never allow children to operate the saw. Allow no person to use this chainsaw who has not
read this Owner's Manual or received adequate instructions for the safe and proper use of this
chainsaw.
• Keep everyone – helpers, bystanders, children, and animals – a SAFE DISTANCE from the
cutting area. During felling operations, the safe distance should be a least twice the height of
the largest trees in the felling area. During bucking operations, keep a minimum distance of
15' (4.6 m) between workers.
• Always cut with both feet on solid ground to prevent being pulled off balance.
• Do not cut above chest height, because a saw held higher is difficult to control against
kickback forces.
• Do not fell trees near electrical wires or buildings. Leave this operation for professionals.
• Cut only when visibility and light are adequate for you to see clearly.
Fig. 11
To Next Page
Loading...
Need help?
General
