3
WARNING:
GENERAL SAFETY RULES
BASIC SAFETY PRECAUTIONS
Do not attempt to operate this tool until you have read all of the
instructions, safety information, etc. contained in this manual thoroughly
and understand them completely. Failure to comply may result in accidents
involving fire, electric shock, or serious personal injury.
• Do not start cutting until you have a clear work area, secure footing, and a planned
retreat path from the falling tree. Cluttered areas invite accidents.
• Keep all children, bystanders, visitors, and animals out of the work area while
starting or cutting with the chainsaw.
• Do not operate chainsaw in an explosive atmosphere, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks that may ignite the dust
or fumes.
• WARNING: Use outdoor extension cords marked SW-A, SOW-A, STW-A,
STOW-A, SJW-A, SJTW-A, or SJTOW-A. These cords are rated for outdoor use,
and reduce the risk of electric shock.
• Polarized Plugs. To reduce the risk of electric shock, this tool has a polarized plug
(one blade is wider than the other). This plug will only fit into a polarized outlet one way.
If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper outlet. Do not change the plug in any way.
• Make sure your extension cord is in good condition. When using an extension cord,
be sure to use one heavy enough to carry the current your product will draw. A wire
gauge size (A.W.G.) of at least 14 is recommended for an extension cord 50' (15 m)
or less in length. A cord exceeding 100' (30 m) is not recommended. If in doubt, use
the next heavier gauge. The smaller the gauge number, the heavier the cord. An
undersized cord will cause a drop in line voltage, resulting in loss of power and
overheating.
• Inspect extension cords periodically, and if damaged, have repaired by a licensed
electrician. Constantly stay aware of cord location. Following this rule will reduce the
risk of electric shock or fire.
• Wear snug fitting clothing. Always wear heavy, long pants, overalls, jeans or chaps
made of cut-resistant material or ones that contain cut-resistant inserts. Wear
non-slip safety footwear. Wear non-slip heavy duty gloves to improve your grip and to
protect your hands. Do not wear jewellery, short pants, sandals, or go barefoot. Do
not wear loose-fitting clothing that could be drawn into the motor or catch the chain or
underbrush. Secure hair so it is above shoulder level.
• Heavy protective clothing may increase operator fatigue, which could lead to heat
stroke. During weather that is hot and humid, heavy work should be scheduled for
early morning or late afternoon hours, when temperatures are cooler.
• Wear eye protection that is marked to comply with ANSI Z87.1 as well as hearing and
head protection when operating this equipment. Hearing protection should be worn.
• Always be aware of what you are doing when using the chainsaw. Use common
sense. Do not operate the chainsaw when you are tired, ill, or under the influence of
alcohol, drugs, or medication.
• Do not expose the chainsaw to rain.
• Do not use the chainsaw in damp or wet locations.
To Next Page
Loading...
Need help?
General
