Why is my Yardworks 054-5703-0 Chainsaw bar and chain running hot and smoking?
If the bar and chain are running hot and smoking, it could be due to the chain tension or an empty oil tank. You should check the chain tension and the oil tank. Also check chain tension for over-tight condition.
What to do if my Yardworks 054-5703-0 motor runs, but the chain rotates but does not cut?
If the motor runs and the chain rotates but does not cut, it may be because the chain is dull or on backwards. You should sharpen or reverse the direction of the chain.
Why is the chain not rotating on my Yardworks 054-5703-0 when the motor runs?
If the motor runs but the chain isn't rotating, the chain tension might be too tight. Retension the chain and inspect the guide bar and chain for damage.
Covers work area, children, atmosphere, cords, clothing, eye/hearing protection, and common sense.
Covers alertness, body positioning, carrying, instruction, starting, maintenance, grip, stance, and cord safety.
Covers cutting tension, product use, storage, saving instructions, and chemical warnings.
Explains kickback and provides precautions to minimize it.
Instructions for starting and stopping the chainsaw safely.
Explains correct grip and body position for safe chainsaw operation.
Step-by-step guide for performing cutting operations.
Covers hazardous conditions, proper procedures, undercut, and backcut for felling trees.
How to make the undercut and backcut for felling, including hinge wood.
Explains the process of cutting a fallen tree into logs.
Covers bucking with a wedge, logs under stress, overbucking, and underbucking.
How to remove branches from fallen or live trees.
Lists common problems and their solutions for the chainsaw.
Covers work area, children, atmosphere, cords, clothing, eye/hearing protection, and common sense.
Covers alertness, body positioning, carrying, instruction, starting, maintenance, grip, stance, and cord safety.
Covers cutting tension, product use, storage, saving instructions, and chemical warnings.
Explains kickback and provides precautions to minimize it.
Instructions for starting and stopping the chainsaw safely.
Explains correct grip and body position for safe chainsaw operation.
Step-by-step guide for performing cutting operations.
Covers hazardous conditions, proper procedures, undercut, and backcut for felling trees.
How to make the undercut and backcut for felling, including hinge wood.
Explains the process of cutting a fallen tree into logs.
Covers bucking with a wedge, logs under stress, overbucking, and underbucking.
How to remove branches from fallen or live trees.
Lists common problems and their solutions for the chainsaw.
To Next Page
General
