Yardworks 060-1314-4 User Manual

model no. 060-1314-4 | contact us: 1.866.523.5218 model no. 060-1314-4 | contact us: 1.866.523.5218
25
STARTING THE ENGINE
model no. 060-1314-4 | contact us: 1.866.523.5218
4. Stand back and to the right of the unit,
pull the starter grip lightly until you feel
resistance then pull briskly. Return the
starter grip gently (Fig. 12).
Figure 12
5. Alternatively, for electric start, plug in
the supplied electrical cord into the
starter. Press the electric start button
and make sure that the main supply
voltage is 120 V~ 60 Hz (Fig. 13).
Figure 13
 CAUTION: To prevent damaging the electric starter, do not run it more than
10 times at intervals of 5 seconds on, then 5 seconds off. If the engine does
not start after this series of attempts, allow the starter to cool for at least 40
minutes before trying to start it again. If the engine still does not start, contact
customer service centre for assistance 1.866.523.5218.
Once started, disconnect the plug from the power supply and the starter.

Yardworks 060-1314-4 Specifications

General

Brand	Yardworks
Model	060-1314-4
Category	Snow Blower
Language	English