Yardworks 060-1314-4 User Manual

model no. 060-1314-4 | contact us: 1.866.523.5218model no. 060-1314-4 | contact us: 1.866.523.5218
30
CONTROLS
 WARNING: If snow clogs the discharge chute do not try to remove it
before:
– Releasing the auger control handle.
– Stopping the engine.
– Disconnecting the cable from the spark plug.
Do not put your hand inside the chute or auger. Use the chute clearing
tool included with your snowblower.
CHANGE DISCHARGE DIRECTION:
1. Move the discharge chute rotation lever either left or right.
CHANGE DISCHARGE HEIGHT:
1. Discharge chute deflector lever controls the deflector up or down.
ADJUSTING THE SNOW SHOES
– Tilt the snowblower auger back and place a spacer under the shave plate below the
augers that is the height that you want the shave plate to ride above the ground.
– Loosen the bolts holding the skid shoes in place and slide the skid shoes down until
they contacts the ground.
– Re-tighten the skid shoe bolts.

Yardworks 060-1314-4 Specifications

General

Brand	Yardworks
Model	060-1314-4
Category	Snow Blower
Language	English