Need help?Do you have a question about the Yardworks 31BH65KH515 and is the answer not in the manual?
General| Brand | Yardworks |
|---|---|
| Model | 31BH65KH515 |
| Category | Snow Blower |
| Language | English |
Record model and serial number for future reference and support.
Contact customer support for assembly or operation questions.
Warning regarding chemicals known to cause cancer or birth defects.
Instructions for safe operation and operator familiarity.
Steps to take before operating the snow thrower.
Procedure for safely clearing a clogged snow thrower chute.
Guidelines for machine maintenance and off-season storage.
Explanation of safety symbols used in the manual and on the machine.
Reference to engine manual for starting and stopping procedures.
Instructions for engaging the snow thrower's drive system.
Instructions for engaging the augers and starting snow throwing.
Procedure for replacing sheared auger pins.
Instructions for attaching and securing the snow thrower handles.
Steps for assembling and attaching the snow thrower chute.
Instructions for installing or repositioning drift cutters.
Location and purpose of the clean-out tool.
Information on the location for storing shear pins.
Guidance on checking and adjusting tire pressure.
How to adjust the distance snow is thrown.
Instructions for adjusting the skid shoes for different surfaces.
Procedure to test and verify proper auger control cable adjustment.
How to position skid shoes based on surface conditions.
Description of auger function when engaged.
How snow is discharged via the chute assembly.
Information on the function of the headlight.
How drift cutters assist in deep snow.
How to operate the heated handle grips.
How to engage the augers for snow throwing.
How to engage drive and lock auger control.
How to use the clean-out tool to clear the chute.
How to control snow discharge distance and direction.
How to turn the chute clockwise or counterclockwise.
Reference to engine manual for maintenance procedures.
Refer to Assembly & Set-Up section for tire pressure.
Checking and replacing shave plates and skid shoes.
Procedure for lubricating the gear shaft.
Procedure for cleaning and lubricating wheels.
Procedure for lubricating the auger shaft and bearings.
Refer to Assembly & Set-up for chute adjustment.
Refer to Assembly & Set-up for skid shoe adjustment.
Checking and adjusting the drive control cable.
Adjusting the shift cable for proper speed range.
Refer to Assembly & Set-up for auger control adjustment.
Adjusting preload for chute rod to maintain position.
Procedure for removing and replacing the auger belt.
Procedure for removing and replacing the drive belt.
Procedure for removing and replacing the friction wheel.
Procedure for inspecting the friction wheel for wear.
Procedure for obtaining warranty service from authorized dealers.
Information on implied warranties and liability limitations.
Owner's responsibilities and rights under the emission warranty.
Details of the manufacturer's emission control system warranty coverage.
Owner's duty to perform maintenance and present the unit for service.
List of emission warranty parts covered.
Alerts about hazards related to moving blades and augers.
Warns about the danger of objects being thrown by the machine.
Caution regarding the flammability of gasoline.
Warns about the dangers of carbon monoxide from engine exhaust.
Caution regarding electrical shock hazard.
Warns about hot engine parts and surfaces.
Safe practices for handling and storing gasoline.
Prohibits modification of the engine or governor settings.
Requirement for a spark arrestor on certain lands.
To Next Page
