model no. CBV48CU | contact us: 1.866.523.5218 model no. CBV48CU | contact us: 1.866.523.5218
15
3. STARTING AND STOPPING (SEE FIG. D)
- STARTING
Move the on/off switch forward to the “I” position.
- STOPPING
Move the on/off switch backward to the “O” position.
- VARIABLE SPEED CONTROL
The on/off switch with variable speed (2) controls the airow. The airow can be adjusted from
the minimum to maximum by pushing the on/off switch forward. The airow increases slowly
when the on/off switch is pushed forward gradually.
+
-
Operation
WARNING! The tool runs for a few seconds after it has been
switched off. Let the motor come to a complete standstill before
setting the tool down.