Yardworks 060-2370-2 User Manual

model no. 060-2370-2 | contact us: 1.866.523.5218
12
ASSEMBLING AUXILIARY HANDLE
(See Fig. 2)
CONNECTING UPPER/LOWER
TRIMMER SHAFT (See Fig. 2)
ADJUST THE CUTTING WIDTH (See Fig. 3)
Use cross-head screwdriver to adjust cutting blade
from 10” (25 cm) to 12” (30 cm).
CUTTING LINE (See Fig. 4)
A spool of monofilament cutting line is pre-installed
on the grass trimmer/edger. When the cutting
line needs replacing, insert a new spool. To avoid
injury, always remove the battery pack before
installing the guard, changing a cutting line, or
making any adjustments.
With lower shaft pointing downward
insert lower shaft into upper shaft and
turn shaft collar clockwise to tighten.
Fig. 2
Fig. 3
12” (30 cm)
10” (25 cm)
Assembly
To avoid injury, adjust the auxiliary handle
for optimum control and balance. Do not
overreach when operating the grass trimmer.
Keep proper balance at all times for better
control of the tool in unexpected situations.

Yardworks 060-2370-2 Specifications

General

Brand	Yardworks
Model	060-2370-2
Category	Trimmer
Language	English