Yardworks 060-3877-2 - User Manual

Questions and Answers

A
Anthony YangAug 3, 2025
Why my Yardworks 060-3877-2 Lawn and Garden Equipment Lawn Vac is not vacuuming?
- Y
  ymoralesAug 3, 2025
  Your Yardworks Lawn Vac might not be vacuuming due to several reasons. The bag could be full, dirty, or even torn. Ensure you empty, clean, or replace the bag as necessary. A blockage in the nozzle or impeller could also be the cause; if so, clear the blockage. Also, make sure the bag is zipped up and that the extension cord is properly connected to both the Lawn Vac and a functioning 120 V AC, 60 Hz power outlet. Finally, check the circuit breaker; if it has tripped, reset it.
A
anne61Aug 9, 2025
What to do if my Yardworks 060-3877-2 Lawn Vac stops vacuuming?
- R
  Randall JohnsonAug 10, 2025
  If your Yardworks Lawn Vac stops vacuuming, there are a few things you can check. First, make sure the bag isn't full, dirty, or torn; empty, clean, or replace it if needed. Also, check for blockages in the nozzle or impeller and clear them. Verify that the bag is zipped and the extension cord is correctly connected to both the Lawn Vac and a working power outlet. Finally, see if the circuit breaker has tripped and reset it if necessary. If it trips again, call the Toll-Free Helpline (1-866-523-5218).
B
Brett RamirezAug 18, 2025
How to fix handle position on Yardworks 060-3877-2 Lawn and Garden Equipment?
- M
  Michael RyanAug 18, 2025
  To fix the handle position on your Yardworks Lawn and Garden Equipment, ensure that the carriage bolts are properly seated. Adjust the height of the handle and make sure those bolts are correctly in place. Also, check that the handle knobs are tightened securely.
J
Jason ThompsonAug 25, 2025
Why is my Yardworks Lawn and Garden Equipment Lawn Vac hard to push?
- K
  Katherine WestAug 25, 2025
  If your Yardworks Lawn Vac is hard to push, the vacuuming height might be set too low. Try raising the vacuuming height.