Yardworks LPR020-1 - User Manual

To Next Page

BATTERY MUST BE

CHARGED BEFORE FIRST

USE. TWO TO THREE INITIAL

CHARGING/DISCHARGING

CYCLES MAY BE REQUIRED

TO ACHIEVE MAXIMUM RUN

TIME/CAPACITY.

CA Compliant Charger Included (Model No. CHL82000-1)

Thank you for your purchase.

DO NOT RETURN THIS PRODUCT TO THE STORE. OPERATING, ASSEMBLY,

PARTS, SERVICE QUESTIONS? GO TO WWW.AMERICANLAWNMOWER.COM

OR CALL 1-800-633-1501 BETWEEN 8:00 AM—5:00 PM EST FOR

ASSISTANCE.

SAVE THIS MANUAL FOR FUTURE REFERENCE

WARNING: To reduce the risk of injury, the user must read and understand the owner’s manual

before using this product.

Model LPR020-1 | SKU# 267-3224

OWNER’S MANUAL

20-Volt Lithium-ion Pruner

With (1) 20-Volt 2.0Ah Lithium-ion Battery

Main Page

Need help?

Do you have a question about the Yardworks LPR020-1 and is the answer not in the manual?

The Yardworks 20-Volt Lithium-ion Pruner (Model LPR020-1) is a cordless, battery-powered pruning tool designed for various cutting tasks.

Function Description

The primary function of this device is to prune branches and stems with ease, offering a cordless solution for gardening and landscaping. It utilizes a sharp blade to make clean cuts, powered by a 20-Volt lithium-ion battery. The pruner is designed for efficiency and convenience, reducing the effort typically required for manual pruning shears. It features a safety lock button to prevent accidental operation and a blade guard for user protection. The device is intended for outdoor use in dry conditions and should not be exposed to rain or wet environments.

Important Technical Specifications

Input: 20 V DC, 2.0 Ah
Battery Capacity: 2000mAh
Max Cut Capacity: 1.1 inch (28 mm)
Weight: 3.1 lb (1.4 kg)
Battery Type: 20V Lithium-ion
Charger: CHL82000-1 (included)
Blade: Moving blade and fixed blade
On/Off Trigger Switch: Yes
Safety Lock Button: Yes
Blade Guard: Yes

The maximum cut capacity of 1.1 inches (28 mm) indicates its suitability for a range of pruning tasks, from small twigs to moderately sized branches. The lightweight design (3.1 lb) contributes to reduced user fatigue during extended use. The 20V, 2.0Ah lithium-ion battery provides ample power for efficient cutting and offers the convenience of cordless operation.

Usage Features

The Yardworks pruner is designed for straightforward and safe operation.

Starting and Stopping:

Push the safety lock button and press the on/off trigger switch at the same time.
Release the safety lock button. To stop, release the on/off trigger switch.

Installing the Battery: Slide the battery pack into the pruner until it securely connects. To remove the battery, press the release button and slide the battery pack out.

Operating Instructions:

Always wear protective gloves when changing the blade.
Never attempt to operate the machine without the blade, spacer, or screw correctly secured to prevent damage to the machine.
To move the moving blade (1), use a Hexagon wrench socket (not provided) to remove the blade nut (2) which secures the blade. Remove the blade wave washer (3) and the washer (4) then remove the blade bolt (5). Remove the moving blade (1) along 45° direction.
To insert the moving blade (1), be careful not to allow any foreign matter to become attached to the blade gear and do not damage it. First insert part of the tooth of the blade into the case as shown. Then rotate the blade (1) until the hole of the blade (1) is aligned to the hole of the aluminum gearbox. Incorrect location of the blade will damage the machine. Install the blade bolt then install the washer (4) and the wave washer (3). Attach the blade nut (2) and tighten. Do not over tighten.
The battery must be charged before first use. Two to three initial charging/discharging cycles may be required to achieve maximum run time/capacity.
Always keep hands away from the cutting area. Never touch the blades. They are very sharp and you may cut yourself. Always wear protective gloves while pruning.
Do not operate the machine in an awkward posture. This may cause serious injury.
Use safety glasses, work gloves, and footwear when operating the pruner.
Avoid dangerous environments; do not use this product in the rain or in damp or wet conditions.
Store indoors when not in use, in a dry location out of reach of children.
Stay alert; watch what you are doing. Use common sense.
Do not wear loose clothing or jewelry, and wear protective hair covering if you have long hair.
Maintain tool with care; keep blades sharp and clean for best performance.
Keep children away from the work area.

Maintenance Features

Proper maintenance is crucial for the longevity and optimal performance of the Yardworks pruner.

Cleaning / Storage:

Clean the exterior of the tool thoroughly using a soft brush and cloth. Do not use water, solvents, or polishes.
After use, cover the blades with the guard provided.
Charge the battery before storing.
If the tool is to be stored for an extended period of time or during winter storage, charge the battery at least once every three months to protect it from damage.
Store the tool in a dry secure place out of reach of children.
Do not place any other objects on top of the tool.
The tool must not be stored in temperatures over 40°C (104°F) or under direct exposure to sunlight.
Do not store the tool in places with static electricity.

Blade Maintenance:

Blades can cause injury. Do not press the safety lock of the pruner during maintenance work.
Ensure long and reliable service, regularly carry out the following maintenance:
- Check for obvious defects such as a damaged or loose blade, housing, or components.
- If the tool should stop working properly, repair should be carried out by a qualified individual, using identical replacement parts.
Clean the pruner in water (especially running water), as there is a risk of personal injury and damage to the pruner.
To obtain good cutting results, always make sure the blades are sharp, and clean them from time to time with a soft dry cloth.
A few drops of oil (e.g. vegetable oil) will improve the cutting performance of the blades. Never apply any grease to the blades.
There are no parts inside the equipment which require additional maintenance.

Battery Charging:

Charge the battery pack only with Yardworks 20-Volt Chargers.
Allow at least 60 minutes of charge time before initial use of the pruner.
Make sure the power supply is normal household voltage, 120Volts, 60Hz, AC only.
The battery charger should be operated in temperatures between 39 and 104 degrees F.
The battery should be charged in a cool, dry place.
Two to three initial charging/discharging cycles may be required to achieve maximum run time/capacity.
Do not attempt to open the charger or the tool. There are no customer serviceable parts inside.
Do not incinerate battery packs even if they are severely damaged or completely worn out. They can explode in a fire causing injury.
Use the battery charger indoors only.
Disconnect charger from the power supply when not in use to prevent damage to the charger during a power surge.
When fully charged, the battery can be safely stored in temperatures down to -4° F for a period of up to four weeks, before requiring charging.
Fully charge battery pack every 90 days.
If over 50 percent of the time the battery pack quickly runs down after a full 60 minutes charging period, a replacement battery pack is needed.
To prevent permanent damage to the battery, never store in a fully discharged condition.
Winter Storage: Fully recharge before storage and then again every 90 days.
Since the battery will not develop a memory, it does not have to be fully discharged before recharging.
A small leakage of fluid from the battery cells may occur under extreme usage, charging or temperature conditions. This does not indicate a failure. However, if the outer seal is broken and this leakage gets on your skin:
- Wash quickly with soap and water.
- Neutralize with a mild acid such as lemon juice or vinegar.
- If the battery liquid gets in your eyes, flush them with clean water for a minimum of 10 minutes and seek immediate medical attention.

Battery Disposal:

Remove the battery pack from the pruner. Cover the terminals with heavy duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any components. This product contains lithium-ion batteries which must be recycled or disposed of properly. Local, state or federal laws may prohibit disposal of these batteries in ordinary trash.
The RBRC seal on the li-ion battery pack indicates that the tools to recycle the battery pack at the end of its useful life has already been paid by The Great States Corporation, American Lawn Mower Company. It is illegal to place spent li-ion batteries in the local municipal solid waste or in the trash. RBRC in cooperation with The Great States Corporation American Lawn Mower Company has provided an environmentally friendly way to easily recycle li-ion batteries. For batteries, just contact your local recycling center or call 1-800-8BATTERY for information on where to drop off the spent battery.