Yardworks 2-outlet Water Timerwith Digital Display - User Manual

START TIME
■
Press the + button to advance start time
(hold button for quick advance).
■
Press the – button to reverse start time
(hold button for quick reverse).
HOW LONG
Set watering duration from 1 to 240 minutes using
the + and – buttons.
HOW OFTEN
Set watering frequency as every 6 hrs, 12 hrs, or
from 1 to 7 days using the + and – buttons. 1 is
every day, 2 is every other day etc. up to 7 days.
AUTO
Timer waters according to programmed time,
duration, and frequency.
RAIN DELAY
■
When in AUTO, press + button for 24 hrs,
48 hrs, or 72 hrs.
■
Screen will flash between clock and hours
remaining before programmed cycle resumes.
■
To remove rain delay, turn dial to OFF and then
back to AUTO.
MANUAL/HAND WATERING
To water without interrupting the set cycle, press
[MANUAL] button and then use + and – buttons to
set from 1 to 240 minutes.
■
To remove manual watering (turn off),
turn dial to OFF.
■
To resume programmed cycle turn the
dial back to AUTO.
INSTALLING THE BATTERIES
■
Remove the tray on the back of the timer by
sliding it out.
■
Insert two AA (1.5 V) alkaline batteries
(not included) and replace the tray.
■
Replace batteries when low battery icon appears.
INSTALLATION
■
Attach timer to an outdoor hose faucet and turn
on after programming.
PROGRAMMING THE TIMER
■
Rotate the dial to positions indicated for setup.
SET CLOCK
■
Press the + button to advance clock time
(hold button for quick advance).
■
Press the – button to reverse clock time
(hold button for quick reverse).
PN 91234-24 rB
2-outlet Water timer
With Digital Display
059-3230-0
■
PROGRAMMING FOR THE DIGITAL OUTLET OF THE TIMER
■
THE MANUAL OUTLET CANNOT BE PROGRAMMED DIGITALLY
MANUAL OUTLET
The manual port of the timer gives access to the
hose faucet without interrupting the programmed
cycle of the digital outlet.
■
Open the valve in the outlet by turning the lever
counterclockwise to the open position.
■
Close the valve by turning the lever to the
closed position.
TROUBLESHOOTING
Water does not come on at desired time.
Check if:
■
Clock is set to correct time including AM and PM.
■
Start time is set to desired time including
AM and PM.
■
Rain Delay is on.
Timer does not water.
Check if:
■
Faucet is on.
■
Timer is set to AUTO.
■
Hose faucet is on.
■
Batteries are low.
■
Clock is set to correct time including AM and PM.
■
Rain Delay is on.
Water won’t turn off.
Check if:
■
Watering duration is set to desired time.
■
Start times begin after previous watering cycle
has run through all stations and set durations.
■
For bypass/manual outlet: close valve.
Working Water Pressure
Minimum: 25 psi Maximum: 100 psi
Working Temperature
Maximum: Do not exceed 120 degrees F
Minimum: Keep from freezing
Warnings
For outdoor use with cold water only.
p 801 295 9820
f 801 951 5815
www.fluid-studio.net
1065 South 500 West
Bountiful, Utah 84010
proof no: 2 date: 02.11.10 des: SH spck: SH job no: client:
ORB
sku: 91234 upc: NA file name: 91234-24 rB.indd software: InDesign CS3
colors
additional instructions: · Font sizes cannot be smaller than 7 pt. · Proofing Code: LB412365 ·
color non printing Die PMS ???
color non printing Glue Area color non printing Product Position
PMS ???
Registration
Black
Printers are responsible for meeting print production requirements. Any changes must be approved by the client and Fluid Studio. printed piece must meet designated specifications on this form.
dimensions: flat: w: 12.0" h: 6.0" finished: w 3.0" d: 0 h 3.0"
© 2007 Fluid Studio. This work is the property of Fluid Studio, and cannot be used, reproduced or distributed in any way without their express permission.
Imported by YardWorks Canada Toronto, Canada M4S 2B8

Summary

Installing and Programming the Water Timer

Installing the Batteries

Remove the tray, insert two AA batteries, and replace the tray when the low battery icon appears.

Installation Procedure

Attach the timer to an outdoor hose faucet and turn it on after completing the programming.

Programming the Timer Functions

Rotate the dial to indicated positions for setup and follow programming steps for various modes.

Setting the Clock

Advance or reverse the clock time using the + and - buttons, holding for quick advance/reverse.

Setting the Start Time

Advance or reverse the start time using the + and - buttons, holding for quick advance/reverse.

Setting Watering Duration

Set watering duration from 1 to 240 minutes using the + and - buttons.

Setting Watering Frequency

Set watering frequency as every 6, 12 hrs, or 1 to 7 days using the + and - buttons.

Auto Watering Mode

Timer waters according to programmed time, duration, and frequency automatically.

Rain Delay Function

Press + for 24, 48, or 72 hrs rain delay; turn dial to OFF then back to AUTO to remove.

Manual;Hand Watering

Water manually by pressing MANUAL, setting duration, or turn dial to OFF to stop.

Manual Outlet Operation

Using the Manual Outlet

Access the hose faucet by turning the lever counterclockwise to open and clockwise to close.

Troubleshooting Common Issues

Water Not Starting on Time

Check clock, start time, and rain delay settings if water does not commence at the desired time.

Timer Not Watering

Verify faucet is on, timer is in AUTO, hose is connected, batteries are sufficient, and rain delay is off.

Water Wont Turn Off

Check watering duration, start time overlap, and ensure the manual outlet valve is closed.

Specifications and Warnings

Working Water Pressure

Operates between a minimum of 25 psi and a maximum of 100 psi.

Working Temperature

Maximum operating temperature is 120 degrees F; keep from freezing.

Important Usage Warnings

For outdoor use with cold water only.

Yardworks 2-outlet Water Timerwith Digital Display Specifications