E-2
Safety Precautions That Must Always Be Observed
General Precautions
• Read and understand this manual to ensure the safe usage of the
product.
• Keep this manual in a safe, convenient place so that it can be referred
to whenever necessary. Make sure that it is delivered to the final user
of the product.
• Do not remove cables or connectors while power is being supplied.
There is a risk of electric shock, operational failure of the product, or
burning.
• Always use a power supply of the specified voltage.
There is a risk of burning, electric shock, or fire.
• Do not attempt to disassemble, repair, or modify the product.
There is a risk of fire or malfunction.
The warranty is void for the product if you disassemble, repair, or modify
it.
• The installation must be suitable and it must be performed only by an
experienced technician.
There is a risk of electric shock or injury.
• Before connecting the machine and starting operation, make sure that
an emergency stop procedure has been provided and is working cor-
rectly.
There is a risk of injury.
• Do not touch anything inside the product.
There is a risk of electric shock.
• Do not damage, pull on, apply excessive force to, place heavy objects
on, or pinch the cables.
There is a risk of failure, damage, or electric shock.
• Never use the product in locations subject to water, corrosive atmo-
spheres, or flammable gas, or near flammable objects.
There is a risk of electric shock or fire.
To Next Page
Loading...
