E-3
Storage Precautions
• Do not attempt to use a product that is damaged or that has missing
parts.
• Install external emergency stop circuits that shut OFF the power sup-
ply and stop operation immediately when an error occurs.
• Do not touch the product with wet hands.
There is a risk of product failure.
• Close all applications before you turn OFF the power supply to the
computer.
There is a risk of file corruption.
• Do not place an excessive load on the product during storage. (Follow
all instructions on the packages.)
There is a risk of injury or damage.
• Do not install or store the product in any of the following locations.
• Locations that are subject to direct sunlight
• Locations that are subject to ambient temperatures that exceed prod-
uct specifications
• Locations that are subject to relative humidities that exceed product
specifications
• Locations that are subject to condensation as the result of extreme
changes in temperature
• Locations that are subject to corrosive or flammable gases
• Locations that are near flammable materials
• Locations that are subject to dust, salts, or iron powder
• Locations that are subject to water, oil, or chemicals
• Locations that are subject to vibration or shock that exceeds product
specifications
• Locations near devices that generate strong magnetic fields
• Locations that are subject to radiation
If you store or install the product in any of the above locations, the
product may fail or be damaged.
To Next Page