3 Receiving
Please perform the following tasks upon receipt of the option:
•
Inspect the option for damage. Contact the shipper immediately if the option appears
damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the name
plate of the option package.
• Contact your supplier if you have received the wrong model or the option does not function
properly.
u
Option Package Contents
Description Option Unit Ground Wire Warning Labels
Installation
Manual
–
Quantity 1 4 1 1
u
Tools Required for Installation
A
Phillips screwdriver (M3, M3.5 to M6 metric or #1, #2 U.S. standard) is required to install
the option. Screw sizes vary by drive capacity. Select a screwdriver appropriate for the drive
capacity.
Note: Tools required to prepare the option cables for wiring are not listed in this manual.
3 Receiving
10
YASKAWA TOEP YAICOM 17B V1000 Option Dual-Port Modbus TCP/IP SI-EM3D/V Installation Manual
CJ
m
~
To Next Page
Loading...
