Need help?Do you have a question about the YASKAWA GPD 506/P5 and is the answer not in the manual?
Information on obtaining technical assistance for installation and troubleshooting.
Explains Modbus RTU protocol and GPD 506 communication features.
Step-by-step guide for installing the CM086 option board.
Provides detailed instructions for wiring the CM086 board, including shield termination.
Configuration of run/stop and frequency reference sources via parameter n002.
Parameters n101-n106 for configuring communication settings like timeouts and parity.
Enlists drive parameters that can be read or written for configuration.
Explains communication errors (CE) and drive responses based on n102 settings.
Explains how parameter n002 determines control source priority for commands.
Information on obtaining technical assistance for installation and troubleshooting.
Explains Modbus RTU protocol and GPD 506 communication features.
Step-by-step guide for installing the CM086 option board.
Provides detailed instructions for wiring the CM086 board, including shield termination.
Configuration of run/stop and frequency reference sources via parameter n002.
Parameters n101-n106 for configuring communication settings like timeouts and parity.
Enlists drive parameters that can be read or written for configuration.
Explains communication errors (CE) and drive responses based on n102 settings.
Explains how parameter n002 determines control source priority for commands.
General| Model | GPD 506/P5 |
|---|---|
| Input Frequency | 50/60 Hz |
| Power Rating | 1.2kVA |
| Frequency Range | 400Hz |
| Communication Options | Modbus |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat |
| Storage Temperature | -20°C |
| Humidity | 95% RH (Non-condensing) |
To Next Page
