YASKAWA V1000 SI-EM3D/V - Web Interface Operation; Enhanced Web Page Requirements and Notes; Navigating the Web Interface Tabs

8 Web Interface
The option contains a series of web pages that allow for viewing of status and diagnostic
information through a standard web browser.
The web page is accessed through a self-contained web server at port 80. Access the home
page by typing the IP address of the option in a web browser. Example: "http://192.168.1.20"
The IP address of the option can be read using monitors U6-80 to U6-83 on the digital operator
if it is unknown. Refer to Option Monitors on page 32 for details.
The home page is an HTML-based page providing basic drive and option data and a link to
an enhanced web page requiring a Java© enabled web browser.
Enhanced Web Page Notes:
• The Enhanced Web Pages use a series of Java© applets.
• PCs must have Java SE 6 Update 14 or later installed to view the enhanced web pages.
• The Java© applets require an internet connection to check the revocation status.
• When no internet connection is available, disable the revocation check by changing a Java
setting in the PC: All Programs / Java / Configure Java / Advanced Tab. Set "Perform
certificate checks on" to "Do not check".
Enhanced Web Page Tab Page
Main Tab 44
Drive Status Tab 45
Network Tab Refer to the option Technical Manual for details on this tab.
Email Alerts Tab Refer to the option Technical Manual for details on this tab.
Parameter Access Tab
<1>
Refer to the option Technical Manual for details on this tab.
Configuration Tab
<1>
Refer to the option Technical Manual for details on this tab.
Custom Tab 46
<1> Accessible after entering a valid password.
8 Web Interface
YASKAWA TOEP YAICOM 17B V1000 Option Dual-Port Modbus TCP/IP SI-EM3D/V Installation Manual
41