Yazaki Aroace WFC-SC10 User Manual

WATER-FIRED SINGLE-EFFECT
ABSORPTION CHILLER
This product is a water-fired single-effect absorption unit which provides chilled
water for cooling in central plant type air conditioning systems. WFC-SH model chiller-
heaters also provide hot water for heating in two-pipe central plant type systems. Units
with nominal refrigeration capacities of 10, 20, 30, and 50 tons are complete with
operating and safety controls. The absorption chiller or chiller-heater is energized by a
heat medium (hot water) from a process, cogeneration, solar, or waste heat source
capable of providing a temperature range of 158 – 203°F (70 – 95°C).
CONTENTS
GENERAL Page
 GENERAL 2
 MODEL DESIGNATION 2
 ACCESSORIES 2
 STANDARD SPECIFICATIONS 3
 CONTROL ADJUSTMENTS 4
 EQUIPMENT DIMENSIONS 5
 TYPICAL SYSTEM DESIGN 7
 WIRING DIAGRAMS 8
INSTALLATION
 RIGGING AND MOVING 11
 LOCATION AND CLEARANCES 13
 FOUNDATION 13
 LEVELING 14
 PIPING 14
Page
 CHILLED/HOT WATER PIPING 15
 COOLING WATER PIPING 15
 HEAT MEDIUM PIPING 16
 FREEZE PROTECTION 16
 ELECTRICAL 17
 HIGH VOLTAGE CONNECTIONS 18
 CONTROLLING PUMPS AND
VALVES 18
 COOLING TOWER FAN CONTROL 19
 PUMP SAFETY INTERLOCKS 19
 BUILDING MANAGEMENT
SYSTEM INTERFACE 20
 REMOTE MONITORING 20
 WATER QUALITY 22
 INSTALLATION CHECK &
REQUEST FOR STARTUP 22
INSTALLATION INSTRUCTIONS
WFC-SC10, 20, 30, 50
WFC-SH10, 20, 30

Yazaki Aroace WFC-SC10 Specifications

General

Brand	Yazaki
Model	Aroace WFC-SC10
Category	Chiller
Language	English