Yealink CP930W-Base Auto Provisioning Guide

Provisioning Yealink IP Phones
11
Major Tasks for Auto Provisioning
You need to complete four major tasks to provision Yealink IP phones.
The following figure shows an overview of four major provisioning tasks:
For more information on how to manage boot files, refer to Managing Boot Files.
For more information on how to manage configuration files, refer to Managing Configuration
Files.
For more information on how to manage resource files, refer to Managing Resource Files.
For more information on how to configure a provisioning server, refer to Configuring a
Provisioning Server.
For more information on how to obtain the provisioning server address, refer to Obtaining the
Provisioning Server Address.
For more information on how to perform auto provisioning, refer to Triggering the IP Phone to
Perform Auto Provisioning.
If you are not familiar with auto provisioning on Yealink IP phones, you can refer to An Instance
of Auto Provision Configuration.

Yealink CP930W-Base Specifications

General

Wireless Connectivity	Yes
Wireless Technology	DECT
Charging Time	3 hours
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% (non-condensing)
Display	color LCD
Microphone Pickup Range	360°
Speaker	Built-in speaker
DECT Frequency Range	1880-1900 MHz
DECT Standards	DECT
Standby Time	7 days
Base Station Ports	1 x Ethernet port
Power Adapter	AC 100-240V
Power Supply	5V/1A
Compatibility	Yealink